 |
Customer
brought in her engagement ring and asked to have a matching wedding
band made. We worked on a few designs and came up with a double matching
wedding band that creates a whole new look as the rings are worn together.
The platinum setting houses 4 marquiose diamonds bezel set. This setting
really shows off her beautiful
emerald cut center stone! |
|
 |
Platinum Engagement Ring with antique style "clawfoot" prong head, (1ct. diamond) with criss cross diamond shank.
Matching Platinum Wedding Band cradles Eng. Ring, but is able to be worn alone as well. (.30ct twt). |
 |
This
amazing almost 5ct. diamond engagement ring is truly one
of a kind! All done in platinum, this ring re-worked the
customer's old eng.
ring/wed. band combo. Where it formerly was in an ordinary "tiffany" setting,
we combined some of the diamonds from the eternity wedding
band to be used in the eng. ring. The diamonds (.25ct. each)
are pave'd up
the sides of this higher set ring. The 6 prong center head
securely holds the diamond, and is finished off with a diamond
collar at the
head's base. Corresponding wedding band shown at right. |
|
 |
This
wedding band uses the remaining diamonds from what was once
an eternity channel band. It is re-done into a pave' band
that matches up against
its paring engagement ring (shown at left). Each stone is
.25ct and is seen clearly, and sits securely in this setting
(able to stand up to everyday wear).
The diamonds are set just along the top, to begin and end
with its matching engagement ring, but can easily be worn
alone, and makes
an equally stunning statement. |
 |
Using this customer's grandmother's 1.30ct. pear shape diamond, we created a new platinum setting by adding these two trillions. They create a whole new look for this center stone, in this classic, but contemporary mounting. |
|
 |
1.50 ct. round brilliant diamond in swooping platinum setting.
The euro shank creates a wonderful dynamic, while keeping the ring from spinning on the finger, and the dainty airlight on the side of the center
stone box lets the diamond sparkle to the max! The matching wedding band sits right next to the engagement ring, playing nicely off each other.
With the side stones on the wedding band, each ring has its own specialty. |
 |
1.00ct. beautiful diamond ring, enhanced with hand fabricated filigree and complimented with a floral engraving throughout. Pave' diamonds on the sides lead up to make the center diamond center stage. |
|
 |
2ct. round brilliant center stone, flanked with .75 ct. trillions on either side. This beautiful platinum ring hits a high note at every turn, from the open air lines to the sleek knife edge shank. This customer said "I do" all over again for their 10th anniversary. |
 |
1.03ct
Radiant diamond, set in a bezel with sloping sides and cross under design,
set in Platinum. Simplicity and elegance at its finest. |
|
 |
Platinum
diamond band using 5 .35ct. diamonds, 1.75ct. twt. Common prong setting
with airlines allows the diamonds to be the focus, not the metal. |
 |
3 Stone wedding ring set in this innovative design. Stones sit above micro pave' diamond rings underneath them, which reflect off each other. Beautiful combo of prongs, micro- pave, and the airy openings let the ring truly sparkle, while the engrave ties everything together. |
|
 |
1.88ct.
center diamond shadowed by an under-ring of small micro-pave' diamonds.
This design is repeated in the side stones (.70ct each). The "surprise" diamonds
on the sides of the flowered underbezels really add a nice sparkle to
the already magnificent design of the ring, plus the engraving makes for
quite an impact, as well as conversation piece. |
 |
1.51ct
cushion cut diamond set in this dynamic setting, which has 40ct. twt of
small dias, pave' set, that practically points to the center stone. The
light airy center box with double prongs lets in loads of light, and replicates
the antique, while straddling the contemporary, and vintage spectrum. This
also has a matching wedding band, shown at right. |
|
 |
This
pave' eternity band sits elegantly next to the engagement ring (shown
at left.). Adding an extra element of diamond sparkle, while not taking
away from the eng.
ring. 1.16ct of 4pt. diamonds set in platinum make this band wearable
with the eng. ring, or alone. |
 |
This
14K white gold ring was made using the customer's diamonds, and design
she had in mind. Working side by side, we collaborated and I essentially
became her hands to make what she had envisioned. The darkness of this
ring was made using a patina (or oxygenating process). The whites and
darks create a lot of depth in this truly unique ring. |
|
 |
.48ct round brilliant center stone set in an antique "clawfoot" prong mounting. This one of kind piece is Victorian to the end with the 14k rose gold roses descending down the shank with intermittent pave diamonds. Every part of this ring relates to the other, finished off with a swirled engraving pattern to replicate the flowery setting. |
 |
3 stone ring containing a 1.61ct center Princess cut diamond and
2 .50ct side stones. There are 26 small diamonds continuously channel set around the
shank. Diamonds are set in a Platinum mounting with a hand engraved
inscription on the side of the shank. Customer wanted to integrate
the look of a wedding band within an engagement ring, instead of 2
separate rings. The stunning outcome of this one of a kind ring is
quite evident! |
|
 |
This
matching wedding band enhances the antique engagement ring,
while creating a beautiful look together. The wedding band
matches perfectly with the stones and engraving. |
 |
3
stone ring using a 1.50ct. round brilliant center stone
with 2 .35ct diamonds on either side. .64ct of diamonds
in euro shank are pave' set, enhanced by the beautiful
engraving throughout. To top off this ring, we put 2 .08ct
diamonds on the north and south sides of the center stone.
This ring shimmers and sparkles at every turn! This also has
a matching wedding band (shown at right). |
|
 |
This
matching wedding band sits perfectly right next to the
engagement ring (shown at left). We used equally sized
diamonds pave'set in this
wedding band to go along with the engagement ring. The engraving
also matches, along with the outer diamond on the side, which echoes
the ones in the engagement ring. The duo together creates a ring of
royalty! |
 |
14K
white gold engagement ring, using a 1.5 ct diamond bestowed
to her from her grandmother. Set in a "modern antique style"
with surprise diamonds on sides of center stone. This also
has a matching wedding band (shown at right). |
|
 |
14K
white gold eternity band, pave set diamonds (supplied from
her grandmother's ring). Ring matches in style her Engagement
Ring (shown at left), also having small diamonds burnished
into the sides. |
 |
Radiant
Ring
This white gold setting houses a 1.5ct radiant cut diamond
surrounded by .02ct diamonds, pave' set around. .03ct diamonds
going 3/4 the way down on either side, complimented by a wheat
engraving pattern on the sides. This also has a matching wedding
band (shown at right). |
|
 |
Diamond
eternity wedding band in white gold with wheat engraving pattern
design on each side. This ring is the complimentary match
to the Radiant Ring (shown at left). |
 |
Platinum
Solitaire
with Cross-Under Mounting using a 1ct. Center Stone Diamond |
|
 |
Simple
Elegant Solitaire
1 carat princess cut diamond beautifully set in a smooth and
elegant four prong platinum setting. |
 |
Redesign
of an old engagement ring. Using customer's stones, we re-created
a whole new look blending antique elements with some contemporary
features. The 2.26ct center marquise diamond is highlighted
with 18 pave'd diamonds. The surprise diamonds on the side
create a "firework" burst of light. |
|
 |
3.01ct
Radiant diamond prong set, surrounded by 16 .015ct small diamonds
(pave set). This one of a kind ring boasts 2 large baguettes
capped off by 2 .04ct round brilliant diamonds on the sides.
For this 20th anniversary gift, the engraving showcases everything
together to make quite an extrordinary statement! |
 |
Oval
1.5ct diamond set in platinum, flanked by baguette and marquise
combo. The side diamonds were derived from customer's grandmother's
cocktail ring. Engraving throughout ties together the modern
form of the ring with antique notions. |
|
 |
Re-make
of customer's antique engagement ring
Using same design...but improving construction. 2 ct. champagne
diamond in center with small micro diamonds surrounding it
in platinum. |
 |
1.5
ct emerald cut diamond surrounded by .015ct dias pave' set
all on same level. Diamonds galore on this one with more micro
diamonds on sides of center box and 3/4 way down the shank.
18k yellow gold bezels with natural yellow surprise diamonds
on either end of center box. The engraving on this ring really
brings together the contemporary design with antique highlights! |
|
 |
Platinum
engagement ring housing a 2ct. center stone, with micro diamonds
set on every facet of the ring giving it a modern, yet antique
look. |
 |
Platinum
Diamond ring containing a series of baguettes, supplied
by the customer from her mother and grandmother's rings.
Ring was a collaborative design with the customer. The
diamonds were laid out by this customer in a way that had
special meaning to her. |
|
 |
2
ct. F SI1++ round brilliant surrounded by small diamonds,
pave' set, in a platinum mounting, creatively designed
to show off every diamond from every angle. Small cut-a-way
under center stone allows more light to shine on this already
stunning brilliant piece. |
 |
1.19ct
cushion shaped diamond (D Vs1), using small diamonds around
in a tight pave' platinum setting. The sides are composed
of a light filigree design, finished off with beautiful
engraving down the sides
of the shank. |
|
 |
.75ct. center diamond surrounded by .01ct diamonds. The surrounding diamonds really enhance this center stone, as well as the undercut setting, which allows a wedding band sit perfectly against it without any space. |
 |
1ct.
diamond center, flanked by two .15ct diamonds in white gold
setting. All sides hand engraved, and hand fashioned filagree
under center stone. This ring has a euro shank (squared at
bottom). |
|
 |
Using diamonds from customers old engagement ring and wedding
band, we created a whole new engagement ring. This design maximized the diamonds she had, and showcased them in a format that really enhanced
the smaller diamonds, while highlighting the beautiful pear shape stone. The open split shank made of yellow gold, combining a white gold head
adds to the unique composition of this design. |
 |
14K
white gold 3 diamond ring w/pave straps. |
|
 |
Hand
Fashioned Scalloped Diamond Eternity Band
with Pink Sapphires (sides),
set in Platinum, with a 2.15ct. center stone |
 |
Hand
Fashioned Platinum Ring, using 1ct. center stone and graduating
side stones. Double claw/split prong center head with braided
design down the sides and under gallery. |
|
 |
Using
a 1.38ct. center diamond, and flanked by 5 .10pt diamonds
on each side (1ct.twt), this ring was a complete collaborative
effort. The customer pretty much used my idea as a skeleton
to create this original, modern & stunning platinum ring. |
 |
Princess
Cut Diamond Eternity Band (channel set) with small round diamonds
pave set on the sides. |
|
 |
There
is 1.00ct. twt. of baguettes in this platinum band. It was
designed to contour and compliment the engagement ring (shown
above) and also to be worn all on its own. |
 |
Platinum
ring housing a 1.25 ct. princess cut diamond, flanked by two
smaller princess cuts, offset by yet more tiny princess cuts
in a channel setting, set right in the shank of the ring.
The effect is just an stunning array of diamond beauty! |
|
 |
14K
white gold celtic trinity engagement ring. Small dias micro
beaded going 1/2 way down top of shank, and 2 dias per side
inbetween the trinity symbols. Engraving enhances this design
throughout. |
 |
Platinum
Engagement Ring containing a 1.50ct. D color, SI1 clarity
Princess Cut Diamond. There are 4 small princess cut diamonds
channel set into each side. Also with this ring, there
are 2 small round diamonds pave' set on each side of the
underbezel (underneath center diamond). |
|
 |
1.21ct
Asscher Cut Diamond housed in a Platinum ring, set with
double prongs, and baguettes channel set on the sides.
This ring also has small round diamonds pave' set on the
sides of the underbezel (where center stone is)...Finishing
off this original design is the intricate hand engraving
work, with accent diamonds integrated into the engraved
design. |
 |
Butterfly
Ring
Platinum mounting which used 3/4 carat princess cut center
diamond with 10 small diamonds on either side, accompanied
with a few diamonds in the wings. |
|
 |
Pave
Engagement Ring
1.5 ct center stone set in unique 4 prong box platinum engagement ring. Sides
are pave' set with graduating diamonds lovingly added from her grandmother's
ring. |
 |
4.05
carat total weight in this amazing platinum diamond band!
Diamonds are prong set, encompassed with 2mm wide borders.
The sides top off this ring with 4 intense yellow sapphires
burnished right in it! |
|
 |
This
5 row prong set gold wedding band glimmers from every angle!
The scalloped sides creates an original look that enhances
the diamonds within its borders. This ring uses over 5
carats of diamonds. |
 |
14K
yellow gold High School Class Ring. This young customer
wanted a ring all of his own design. After being turned
away by many other jewelers, he came to me and together
we worked on his piece, using his designs and my knowledge
to make it work! The ring contains over a 1/4ct. of small
diamonds integrated into it, to create brilliance and sparkle!
The ring measures 1 square inch on top where it depicts
his high school and the sides represent the school's team,
as well as his own signature on the other side. The young
man who wears this ring is going into fashion design and
wanted to "make a big statement." I think we achieved his
goal! |
|
 |
18K
wedding ring set
Engagement ring/wedding band/his band. Unique design that relates all 3 to one
another. |
 |
14K
yellow gold ring.
A re-design using the customer's diamonds. We re-vamped this ring to show off
the beautiful 1++carat center stone and highlight the other stones, giving this
ring a dazzing effect from every angle. |
|
 |
14Kw/18Ky—Engraved
Engagement Ring/Wedding Band Set
.26ct. yellow diamonds and white diamonds e.r.
.29ct. w.b. |
)
)
)
)
)
)
)
)
)
)